Hello Friends,
In this post, we are going to make 3d led cube using arduino. It's 3*3*3 led cube, so require a total of 27 leds. For driving 27 leds we require driver IC like ULN2003.
In 3*3*3 led cube, basically there are three layers. In first layer, ground is common for 9 leds and same for layer 2 and layer 3.
We are using ULN2003 IC, since arduino can't provide enough current to drive all the 27 led simultaneously.
Anode pins are connected from pin no. 2 to 10.
Download the code from here:
Download
Check out the video:
In this post, we are going to make 3d led cube using arduino. It's 3*3*3 led cube, so require a total of 27 leds. For driving 27 leds we require driver IC like ULN2003.
List of components:
Connections:
 |
| Schematics |
There are 9+3 output pins, 9 for anode and three for 3 layers.
We are using ULN2003 IC, since arduino can't provide enough current to drive all the 27 led simultaneously.
Anode pins are connected from pin no. 2 to 10.
Download the code from here:
Download
Check out the video:
very good!!!
ReplyDeleteThanks man
ReplyDelete